Heavy Duty Column Caps provide a rugged connection between columns and beams. Charted sizes are for heavy timber and Parallam®. Also available for glulam, LVL and rough sawn timber.
Precision punched and formed for good fit and alignment.
Material : 7 ga. and 3 ga.
Finish : Black copolymer paint, Hot-dip galvanized.
Uplift loads have been increased for wind or earthquake and must be reduced for cantilever
Seat Bearing based on 460 psi for nominal and 560 psi for Parallam®
Check parallel to grain bearing for species and grade being used for column.
Precision punched and formed for good fit and alignment.
Material : 7 ga. and 3 ga.
Finish : Black copolymer paint, Hot-dip galvanized.
Uplift loads have been increased for wind or earthquake and must be reduced for cantilever
Seat Bearing based on 460 psi for nominal and 560 psi for Parallam®
Check parallel to grain bearing for species and grade being used for column.
Unit of Measure
Beam (W1) |
N/A 5 1/4 |
Column (W2) |
N/A 3 1/2 |
L |
N/A 13 |
H |
N/A 7 1/2 |
Bolt Schedule - Beam |
N/A (4) 3/4" |
Bolt Schedule - Column |
N/A (2) 3/4" |
Wind Uplift |
N/A 6000 |
Seat Bearing |
N/A 38220 |
Finish |
N/A Black Copolymer Paint Hot-Dip Galvanized |
