Hangers for Micro = Lam®, Parallam®, Gang-Lam®
DS Deep Seat Hangers carry heavy loads obtained with Micro=Lam, Parallam and Gang-Lam products. Top flanges are 3-3/8" long with 2 nail holes per flange spaced for 3 1/2" minimum header, except DS 2.69 hangers have 2 1/2" top flanges.
Load charts are based on seat compression of 600 psi. Solid header required. Consult your wood product manufacturer for limitations when LVL headers have top edge nailing.
The 1 5/8" and 3 1/8" sizes are for 1 ply and 2 ply nominal lumber respectively. Other sizes are for LVL and PSL lumber.
The 10d x 1 1/2" nails are No. 9 gauge joist hanger nails. All other nails are common nails.
Material : 12 gauge.
Finish : Galvanized G60.
DS Deep Seat Hangers carry heavy loads obtained with Micro=Lam, Parallam and Gang-Lam products. Top flanges are 3-3/8" long with 2 nail holes per flange spaced for 3 1/2" minimum header, except DS 2.69 hangers have 2 1/2" top flanges.
Load charts are based on seat compression of 600 psi. Solid header required. Consult your wood product manufacturer for limitations when LVL headers have top edge nailing.
The 1 5/8" and 3 1/8" sizes are for 1 ply and 2 ply nominal lumber respectively. Other sizes are for LVL and PSL lumber.
The 10d x 1 1/2" nails are No. 9 gauge joist hanger nails. All other nails are common nails.
Material : 12 gauge.
Finish : Galvanized G60.
Unit of Measure
Size |
N/A 1 3/4 x 14 |
Steel Gauge |
N/A 12 |
Nail Schedule - Top |
N/A (4) 16d |
Nail Schedule - Face |
N/A (10) 16d |
| Nail Schedule - Joist1 | N/A (8) 10d x 1 1/2 |
Seat Bearing Size |
N/A 3 1/2 in |
Finish |
N/A Galvanized G60 |
Load @ Normal Condition |
N/A 4340 lbs |
| Load @ 115%2 | N/A 4340 lbs |
Load @ 125% |
N/A 4340 lbs |
- 1 The 10d x 1 1/2" nails are No. 9 gauge joist hanger nails. All other nails are common nails.
-
2 The appropriate allowable downward loads (Normal, 115%, and 125%) shall be selected based on duration of load in accordance with the stress increases permitted by the applicable Code.
Allowable loads are based on nail values for Douglas Fir-Larch. LVL and PSL hangers are based on 600 psi compression perpendicular to the grain, nominal lumber sizes are based on 565 psi compression.
