Low Cost Hangers for General Framing
EPH Economy Pocket Hangers are engineered with less metal for lower cost, but full 1 1/2" seat bearing for allowable loads below. Speed prong aids installation.
Material : 20 ga.
Finish : Galvanized G60.
EPH Economy Pocket Hangers are engineered with less metal for lower cost, but full 1 1/2" seat bearing for allowable loads below. Speed prong aids installation.
Material : 20 ga.
Finish : Galvanized G60.
Unit of Measure
Hanger Size |
N/A 1 9/16 x 7 7/8 |
Wind Uplift |
N/A 750 |
Nail Schedule - Header |
N/A (10) 16d |
Nail Schedule - Joist |
N/A (6) 10d x 1 1/2 |
Thickness |
N/A 20 gauge |
Finish |
N/A Galvanized G60 |
Load @ 10D Nails, Normal Condition |
N/A 1120 |
| Load @ 10D Nails, 115%1 | N/A 1285 |
Load @ 16D Nails, Normal Condition |
N/A 1330 |
Load @ 16D Nails, 115% |
N/A 1435 |
- 1 Loads based on UBC values for So. Yellow Pine & Douglas Fir; multiply by.80 for Spruce-Pine-Fir. Uplift includes 33% short term increase and must be reduced for cantilever loads. PH-24S will accept 8d nail, or order as PH-24 which includes 0.125 x 1 1/4 nails.
