HJU Hangers are recommended for facemounting to LVL or PSL headers.
These hangers are intended for use with parallel strand lumber (PSL) or laminated veneer lumber (LVL).
A 9" high facemount hanger that can carry 4860 lbs., enough for most applications.
A 9" high facemount hanger that can carry 4860 lbs., enough for most applications.
Material : 16 gauge and 12 gauge.
Finish : Galvanized G60.
These hangers are intended for use with parallel strand lumber (PSL) or laminated veneer lumber (LVL).
A 9" high facemount hanger that can carry 4860 lbs., enough for most applications.
A 9" high facemount hanger that can carry 4860 lbs., enough for most applications.
Material : 16 gauge and 12 gauge.
Finish : Galvanized G60.
Unit of Measure
Steel Gauge |
N/A 16 |
Seat Bearing Size |
N/A 3 1/4 in |
Nail Schedule - Header |
N/A (35) 16d |
Nail Schedule - Pocket |
N/A (20) 10d x 1 1/2 |
Finish |
N/A Galvanized G60 |
Load @ Normal Condition |
N/A 5250 lbs |
| Load @ 115%1 | N/A 5560 lbs |
Load @ 125% |
N/A 5760 lbs |
-
1 Allowable loads are based on 565 psi compression and nail values for Douglas Fir-Larch.
The appropriate allowable downward loads (Normal, 115%, and 125%) shall be selected based on duration of load in accordance with the stress increases permitted by the applicable code.
