JUX Hangers are recommended for facemounting to LVL or PSL headers.
These hangers are intended for use with parallel strand lumber (PSL) or laminated veneer lumber (LVL).
Full depth facemount hanger for normal loads with minimum nailing required.
Full depth facemount hanger for normal loads with minimum nailing required.
Material : 16 gauge and 12 gauge.
Finish : Galvanized G60.
These hangers are intended for use with parallel strand lumber (PSL) or laminated veneer lumber (LVL).
Full depth facemount hanger for normal loads with minimum nailing required.
Full depth facemount hanger for normal loads with minimum nailing required.
Material : 16 gauge and 12 gauge.
Finish : Galvanized G60.
Unit of Measure
Steel Gauge |
N/A 14 |
Seat Bearing Size |
N/A 3 in |
Nail Schedule - Header |
N/A (22) N53 |
Nail Schedule - Pocket |
N/A (10) 10d x 1 1/2 |
Finish |
N/A Galvanized G60 |
Load @ Normal Condition |
N/A 3300 lbs |
| Load @ 115%1 | N/A 3795 lbs |
Load @ 125% |
N/A 4125 lbs |
-
1 Allowable loads are based on 565 psi compression and nail values for Douglas Fir-Larch.
The appropriate allowable downward loads (Normal, 115%, and 125%) shall be selected based on duration of load in accordance with the stress increases permitted by the applicable code.
