Hip and jack pockets welded to carrier plates that mount to single, double or triple ply girders. Find the part number that matches the number of plys and depth of girder chord.
Material : 3/16" A-36 steel.
Finish : Black copolymer paint.
Material : 3/16" A-36 steel.
Finish : Black copolymer paint.
Unit of Measure
| Hanger Size1 | N/A 4.7 x 5 1/2 4.7 x 7 1/4 |
Seat Depth |
N/A 4 |
Nail Schedule - Top |
N/A (8) 16d |
Nail Schedule - Face |
N/A (10) 16d |
Nail Schedule - Pocket |
N/A Hip (4) 10d Jack (2) 10d x 1 1/2 |
Top Flange Size |
N/A 4" wide x 3" long |
Material |
N/A 3/16" A-36 Steel |
Finish |
N/A Black Copolymer Paint |
Load @ Normal Condition |
N/A 5775 |
| Load @ 115%2 | N/A 1210 5775 |
Load @ 125% |
N/A 5775 |
- 1 The 1.6" and 3.2" sizes are plated trusses, single and double ply respectively.
-
2 The appropriate allowable downward loads (Normal, 115%, and 125%) shall be selected based on duration of load in accordance with the stress increases permitted by the applicable Code.
Allowable loads reported for the HJ hangers are total loads (jack load plus hip load). Minimum hip and jack loads are 3/4 and 1/4 respectively of the tabulated total load.
Allowable loads are based on 565 psi bearing and nail values for Douglas Fir-Larch.
