THJ Truss Hip & Jack Hanger
The first hip and jack hanger that works right or left hand. Facemounts to 2 x 6 or 2 x 8 girder chord. Easy-nail flanges avoid the plated areas. Impressions in seat to align with panel point for perfect location, or hanger can be installed after corner truss is set. 3 1/4" seat bearing, tested and code approved.
Material : 12 gauge
Finish : Galvanized G60.
The first hip and jack hanger that works right or left hand. Facemounts to 2 x 6 or 2 x 8 girder chord. Easy-nail flanges avoid the plated areas. Impressions in seat to align with panel point for perfect location, or hanger can be installed after corner truss is set. 3 1/4" seat bearing, tested and code approved.
Material : 12 gauge
Finish : Galvanized G60.
Unit of Measure
Nail Schedule - Header |
N/A (16) 16d |
Nail Schedule - Hip |
N/A (7) 10d |
Nail Schedule - Jack |
N/A (5) 10d |
Thickness |
N/A 12 gauge |
Finish |
N/A Galvanized G60 |
U.S. Patent No. |
N/A 4,964,253 |
Load @ 565 psi Normal Condition |
N/A 1695 lbs |
Load @ 565 psi 115% |
N/A 1900 lbs |
Load @ 565 psi 125% |
N/A 1900 lbs |
Load @ 565 psi Uplift |
N/A 1010 lbs |
Load @ 565 psi Normal Condition |
N/A 560 lbs |
Load @ 565 psi 115% |
N/A 630 lbs |
Load @ 565 psi 125% |
N/A 630 lbs |
Load @ 565 psi Uplift |
N/A 720 lbs |
