Designed for point loads on floor trusses, open joists, and engineered wood beams.
By transferring load from the bottom chord or flange to the top chord or flange of adjacent girder plies, the load is shared equally and applied in the manner in which the girder was designed. Overstress of plated joints or glue-lines is eliminated.
Available for all standard member widths and depths.
Material : 18 gauge and 16 gauge.
Finish : Galvanized G60.
By transferring load from the bottom chord or flange to the top chord or flange of adjacent girder plies, the load is shared equally and applied in the manner in which the girder was designed. Overstress of plated joints or glue-lines is eliminated.
Available for all standard member widths and depths.
Material : 18 gauge and 16 gauge.
Finish : Galvanized G60.
Unit of Measure
Size |
N/A 3.50/18.00 |
Thickness |
N/A 16 gauge18 gauge |
Finish |
N/A Galvanized G60 |
Allowable Loads |
N/A
|
|||||||||
