BH Bucket Hangers bolt to 2 x 8 min. webs.
BHR Radial Hangers for multiple members.
BHS Hangers are skewed 45°, specify right or left hand.
BHJ Hangers carry 2 ply hip truss and end jack.
BHT Terminal Hangers accept 45° hips, one or two ply, plus single ply end jack. Bolting plate is 1/4 x 7 x 27 high.
Material : BH, BHS & BHJ all 1/4" A-36 steel. BHT pockets are 3/16" A-36 steel.
Finish : Black copolymer finish.
Caution - 2 x 8 maximum bottom chord on carrying girder. Skewed version requires special location of web.
Warning - All girder plys must be securely fastened together to act as one unit and the hanger bolts are not to be considered for this purpose.
| Items |
 BH-3 Bucket Hangers |
BH-5 Bucket Hangers |
BH-6 Bucket Hangers |
 BH-3ML Bucket Hangers |
BH-5ML Bucket Hangers |
|||||
| Pocket Size | 3 1/4 x 5 1/2 | 4 3/4 x 5 1/2 | 6 1/2 x 5 1/2 | 3 3/4 x 5 1/2 | 5 1/2 x 5 1/2 | |||||
| Pocket Nails | (8) 10d | |||||||||
| Girder Bolts | 6 3/4 in | 8 3/4 in | 8 3/4 in | 6 3/4 in | 8 3/4 in | |||||
| Load @ 1 1/2 Long Bolt in Carrying Member | 5160 | 6880 | 6880 | 5160 | 6880 | |||||
| Load @ 3 Long Bolt in Carrying Member | 8520 | 11360 | 11360 | 8520 | 11360 | |||||
| Load @ 4 1/2 Long Bolt in Carrying Member | 8960 | 12360 | 12360 | 9270 | 12360 | |||||
| Wind Uplift | 1255 | |||||||||
| Load @ 1 1/2 Long Bolt in Carrying Member | 4140 | 5520 | 5520 | 4140 | 5520 | |||||
| Load @ 3 Long Bolt in Carrying Member | 6000 | 8000 | 8000 | 6000 | 8000 | |||||
| Load @ 4 1/2 Long Bolt in Carrying Member | 7260 | 11200 | 11200 | 8400 | 11200 | |||||
| Wind Uplift | 1020 | 1020 | 1020 | 1255 | 1255 | |||||
| Material1 | A-36 Steel | |||||||||
| Finish | Black Copolymer | |||||||||
|
||||||||||
