Cleveland Steel - Deep Seat

Hangers for Micro = Lam®, Parallam®, Gang-Lam®

DS Deep Seat Hangers carry heavy loads obtained with Micro=Lam, Parallam and Gang-Lam products. Top flanges are 3-3/8" long with 2 nail holes per flange spaced for 3 1/2" minimum header, except DS 2.69 hangers have 2 1/2" top flanges.

Load charts are based on seat compression of 600 psi. Solid header required. Consult your wood product manufacturer for limitations when LVL headers have top edge nailing.

The 1 5/8" and 3 1/8" sizes are for 1 ply and 2 ply nominal lumber respectively. Other sizes are for LVL and PSL lumber.

Material : 12 gauge.
Finish : Galvanized G60.

Unit of Measure

Items	DS-24 Deep Seat	DS-26 Deep Seat	DS-28 Deep Seat	DS-210 Deep Seat	DS-212 Deep Seat
Size	N/A 1 5/8 x 3 1/2	N/A 1 5/8 x 5 1/2	N/A 1 5/8 x 7 1/4	N/A 1 5/8 x 9 1/4	N/A 1 5/8 x 11 1/4
Steel Gauge	N/A 12
Nail Schedule - Top	N/A (4) 16d
Nail Schedule - Face	N/A (4) 16d	N/A (6) 16d	N/A (8) 16d	N/A (10) 16d	N/A (12) 16d
Nail Schedule - Joist¹	N/A (3) 10d x 1 1/2	N/A (4) 10d x 1 1/2	N/A (6) 10d x 1 1/2	N/A (7) 10d x 1 1/2	N/A (10) 10d x 1 1/2
Load @ Normal Condition	N/A 2630 lbs	N/A 3315 lbs	N/A 3595 lbs	N/A 3880 lbs	N/A 4160 lbs
Load @ 115%²	N/A 2630 lbs	N/A 3335 lbs	N/A 3765 lbs	N/A 4090 lbs	N/A 4415 lbs
Load @ 125%	N/A 2630 lbs	N/A 3335 lbs	N/A 3880 lbs	N/A 4230 lbs	N/A 4585 lbs
Seat Bearing Size	N/A 4 in
Finish	N/A Galvanized G60
¹ The 10d x 1 1/2" nails are No. 9 gauge joist hanger nails. All other nails are common nails. ² The appropriate allowable downward loads (Normal, 115%, and 125%) shall be selected based on duration of load in accordance with the stress increases permitted by the applicable Code. Allowable loads are based on nail values for Douglas Fir-Larch. LVL and PSL hangers are based on 600 psi compression perpendicular to the grain, nominal lumber sizes are based on 565 psi compression.