Cleveland Steel Specialty Company
Cleveland Steel Specialty Company
26001 Richmond Rd.
Bedford Heights, OH 44146
Call: 1.800.251.8351   •   Fax: 216.464.9404   •   Email: info@clevelandsteel.com
Print Back
Low Cost Hangers for General Framing

EPH Economy Pocket Hangers are engineered with less metal for lower cost, but full 1 1/2" seat bearing for allowable loads below. Speed prong aids installation.

Material : 20 ga.
Finish : Galvanized G60.
Unit of Measure

Specifications

Hanger Size

 N/A 1 1/2 x 3 5/16

Wind Uplift

 N/A 245

Nail Schedule - Header

 N/A (4) 8d

Nail Schedule - Joist

 N/A (2) 8d x 1 1/4

Thickness

 N/A 20 gauge

Finish

 N/A Galvanized G60

Allowable Loads - So. Yellow Pine

Load @ 10D Nails, Normal Condition

 N/A 450
Load @ 10D Nails, 115%1 N/A 517
  • 1 Loads based on UBC values for So. Yellow Pine & Douglas Fir; multiply by.80 for Spruce-Pine-Fir. Uplift includes 33% short term increase and must be reduced for cantilever loads. PH-24S will accept 8d nail, or order as PH-24 which includes 0.125 x 1 1/4 nails.