Cleveland Steel - Economy Pocket Hanger

Low Cost Hangers for General Framing

EPH Economy Pocket Hangers are engineered with less metal for lower cost, but full 1 1/2" seat bearing for allowable loads below. Speed prong aids installation.

Material : 20 gauge
Finish : Galvanized G60.

Unit of Measure

Items	PH-24S Economy Pocket Hanger	EPH-26 Economy Pocket Hanger	EPH-28 Economy Pocket Hanger	EPH-210 Economy Pocket Hanger
Hanger Size	N/A 1 1/2 x 3 5/16	N/A 1 9/16 x 4 3/4	N/A 1 9/16 x 6 3/8	N/A 1 9/16 x 7 7/8
Load @ 10D Nails, Normal Condition	N/A 450	N/A 670	N/A 895	N/A 1120
Load @ 10D Nails, 115%¹	N/A 517	N/A 770	N/A 1035	N/A 1285
Load @ 16D Nails, Normal Condition	N/A	N/A 800	N/A 1065	N/A 1330
Load @ 16D Nails, 115%	N/A	N/A 915	N/A 1220	N/A 1435
Wind Uplift	N/A 245	N/A 500	N/A 750	N/A 750
Nail Schedule - Header	N/A (4) 8d	N/A (6) 16d	N/A (8) 16d	N/A (10) 16d
Nail Schedule - Joist	N/A (2) 8d x 1 1/4	N/A (4) 10d x 1 1/2	N/A (6) 10d x 1 1/2	N/A (6) 10d x 1 1/2
Thickness	N/A 20 gauge
Finish	N/A Galvanized G60
¹ Loads based on UBC values for So. Yellow Pine & Douglas Fir; multiply by.80 for Spruce-Pine-Fir. Uplift includes 33% short term increase and must be reduced for cantilever loads. PH-24S will accept 8d nail, or order as PH-24 which includes 0.125 x 1 1/4 nails.